Bomb Calorimeter

Available Variants:

1. Automatic Bomb Calorimeter – PB
2. Automatic Bomb Calorimeter – 0.001°C
3. Automatic Bomb Calorimeter – Firing Unit
4. Manual Bomb Calorimeter – Firing Unit
5. Automatic Bomb Calorimeter – 0.01°C
6. Automatic Bomb Calorimeter – A4 Printer

Salient Features:

1. Bomb Calorimeter conforms to IS:1448 (Part 6) / IS:1350 (Part 2).
2. Microprocessor-based controller is provided in automatic models.
3. Automatic models calculate calorific value and water equivalent.
4. Manual model is operated with firing unit and manual calculation.
5. Automatic models can be provided with printer and computer interface as per variant.
6. Temperature resolution is available up to 0.001°C in the specified high-resolution configuration.
7. Automatic measurement and calculation of calorific value and water equivalent are provided.
8. Sample weight can be entered through the keypad.
9. Water equivalent can be set through the keypad.
10. Sample Test and Water Equivalent Test are selectable.
11. Maximum temperature rise is measured and used for automatic calculation.
12. Sensor open and fuse wire open detection are provided in automatic configurations.
13. Real Time Clock records test date and time in specified automatic configurations.
14. Test results can be printed through the specified printer configuration.
15. Computer interface and PC software are available in specified configurations.
16. Data logging and PDF report generation are available in specified configurations.
17. Auto Gas Filling Unit is available in the specified PB configuration.
18. Stainless Steel Bomb is provided.
19. Bomb firing unit is provided as applicable to the selected configuration.

Standard Accessories:

The following accessories are supplied as standard with the Bomb Calorimeter system, as applicable to the selected variant:

1. Calorimeter Vessel with Bomb Support & Insulating Base – 01
2. Water Jacket – 01
3. Combined Lid for Calorimeter Vessel & Water Jacket – 01
4. Stirrer – 01 Set
5. Connecting Lead for Calorimeter Bomb – 01 Set
6. Fine Adjustment Valve with Built-in Pressure Gauge – 01
7. Connecting Tube for Bomb, Pressure Gauge & Fine Regulating Valve – 01
8. Safety Relief Valve with Gas Filling Tube Adapter – 01
9. Pellet Press – 01
10. Spanner for Oxygen Tube Connection – 01
11. Nichrome Ignition Wire – 01 Roll of 5 m
12. Cotton Thread – 01 Roll
13. Stand for Bomb Lid – 01
14. Hook for Lifting Bomb – 01
15. Stainless Steel Crucible – 01
16. Gas Release Valve – 01
17. Bomb Firing Unit – 01 Set
18. Differential Type Digital Thermometer with Sensor – 01
19. O-Rings for Bomb & Valve – 01 Set Each
20. Schrader Valve with Key – 01 Each
21. Standard Benzoic Acid – 01 Bottle

Pre-Installation Requirements:

The following arrangements are to be made by the end user:

1. Digital Top Pan Balance – 0.0001 g
2. 2 KVA UPS with Batteries – 30 min Backup
3. RO Water – Approx. 50 L
4. Oxygen Cylinder – 99.9% Purity, 47 L, Minimum 70 kg/cm² Pressure
5. Clean, Dust-Free Room with Solid, Vibration-Free Working Table
6. Working Area Away from Windows, Ovens and Other Heat-Generating Sources
7. Other Required Consumables

Recommended Consumables:

1. Cotton Reel
2. Bomb O-Ring
3. Valve Body O-Ring
4. Ignition Wire
5. Schrader Valve

Optional Accessories:

1. Nichrome Ignition Wire – Price on Request
2. Cotton Reel – Price on Request
3. Stainless Steel Crucible – Price on Request
4. Valve Body O-Ring – Price on Request
5. Bomb O-Ring – Price on Request
6. Schrader Valve – Price on Request