Grease-Wax Testing Instruments

No description available.

As per IP‑142 & ASTM D 942, IS 1448 (P‑94). Consists of Oxidation Oil bath, Oxidation Bombs, Dish Holder, Sample Dishes, Electronic Pressure Transducer, Touch screen HMI & PLC Controller and Thermometer.

Purpose: This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above 288°C.

Purpose:This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above 288°C. Supplied without Glass Thermometer

The Petroleum Jelly Penetrometer is a precision laboratory testing instrument designed to evaluate the hardness and firmness of Petroleum Jelly by measuring the penetration depth of a specified cone under controlled test conditions. The instrument is available in Automatic Digital Timer and Manual models and is suitable for testing as per ASTM D937, IS 1508, IS 4887, IP 179 and ISO 2137.

Compliance Standards : ASTM D1831, MIL G 10924.

As per ASTM D972, IP 183. Supplied with 2 Nos. evaporation cell. IP/ASTM Glass Thermometers available at extra cost. Detailed specification as follows:

Cone penetration tests not only evaluates the consistency of Lubricating Grease over the full range of NLGI Numbers from 000 to 6, but also evaluates the consistency of stiff greases having penetration number less than 85.

As per ASTM D1743. Supplied without Oven. Further details as per the following pages

EIE Drop Melting Point Apparatus – Complete as per IP 371, supplied with necessary test accessories and IP 40C & IP 41C thermometers.

No description available.

The 4-ball wear tester is used to determine the bearing capacity of lubricant in sliding friction type under extreme high point-contact pressure condition, it fully meets the ASTM D2266-2001 and the ASTM D4172-2004 standards. The tested index including Maximum no-bite load PB, Sintering load PD, comprehensive abrasion value ZMZ. Besides this, this tester can also do long time anti-abrasion test of lubricant, friction efficient, friction and temperature curve are tested.

Compliance Standards : ASTM D1263, FTM 791-3454

This instrument is suitable for detecting the dropping point of all non-liquid waxes including paraffin wax, microcrystalline wax, polyethylene wax, blended wax and natural wax.

As per ASTM D1264, D4950; IP 215; FTM 791-3252. Detailed specifications as per the following page

OIL SEPARATION FROM LUBRICATING GREASE AT ELEVATED TEMPERATURE (ASTM D6184, FTM 791-321)

As per ASTM D 1742. The complete assembly consists of Oil separation Test cell, pressure system assembly, Spatula, Beaker, straight edge, and Thermometer. Climatic cabinet to control temperature at 25 °C as per test requirement is available at extra cost. The detail of each part is narrated below.