Compliance Standards
- IS 5513
Details
- Split type Vicat mould can also be used as an alternative to single piece mould. The split type Vicat mould will consist of a split ring having an internal diameter 80.0 ± 0.1 mm and a height of 40.0 ± 0.2 mm. The split mould will also be provided with a suitable clamping ring. The width and thickness of clamping ring shall be 8 to 10 mm. To ensure interchangeability of the clamping rings, the external diameter at the base of the split mould will be 89.0 ± 0.1 mm with a taper of 2º on the side from base to top edge. Total taper shall be 4º inwards from base to top. The Inside surface of the clamping ring will similarly be tapered. When assembled, this ring will be clear above the base of the split mould, by a distance of 15-18 mm